Updated November 2026

A Montague bike size chart matches your height to a frame size, but height alone rarely tells the full story. This guide shows you how to read the chart, measure your inseam, and check standover and reach so the bike you pick actually fits your body. By the end, you will know which size to start with and how to confirm it before you buy.

Start With Your Height and Inseam

Most Montague charts list frame sizes against rider height ranges, and many also list an inseam range. Use inseam as your primary guide because it tells you how much leg length sits above the saddle, which matters more for fit than total height. If your height puts you between two sizes, let your inseam break the tie. You may also like Louis Garneau Bike Size Chart: How to Find Your Right Fit.

Shopping for one? See our guide: 5 Best Road Bike Shoe Size Charts (2026): Expert Picks.

To measure your inseam, stand against a wall in socks with a hardcover book between your legs, spine pressed up firmly. Mark the top of the book on the wall, then measure from the floor to that mark in centimeters or inches. Repeat the measurement once to confirm it. For a deeper look, Performance Bike Size Chart: How to Find Your Right Frame Fit in 5 Steps covers this in detail.

Check Standover Height

Standover is the clearance between your crotch and the top tube when you stand over the bike with both feet flat. A good fit leaves roughly 2 to 4 inches of clearance on a road or hybrid frame, and a bit more on a mountain bike so you can stop quickly and step off safely. If you have to straddle the bike with your toes barely touching, the frame is too big. Worth reading next: Supercycle Bike Size Chart: How to Find Your Right Frame Fit.

Confirm Reach and Saddle Position

Standover tells you whether the frame is too tall, but reach tells you whether you can comfortably hold the handlebars. With your hands on the grips and your elbows slightly bent, you should lean forward without stretching or feeling cramped. Sit on the saddle with your heel on a pedal at the bottom of its stroke: your leg should be nearly straight. Small adjustments to seatpost height and stem length can refine the fit, so treat the chart as a starting point. We also found Single Speed Bike Size Chart: How to Find Your Right Frame Fit useful on this point.

Use This Quick Fit Checklist

  1. Measure your inseam in centimeters or inches.
  2. Find the Montague size range that matches your height and inseam.
  3. Stand over the frame and confirm 2 to 4 inches of clearance.
  4. Sit on the saddle with your heel on a pedal and check for a near-straight knee.
  5. Ride a short loop to check reach and comfort before committing.

Common Mistakes

  • Choosing by height alone and ignoring inseam, which often leads to a frame that feels too long or too short.
  • Buying a bigger frame to “grow into,” which makes handling less predictable and standover unsafe.
  • Ignoring the saddle and stem, which can often be adjusted to improve fit on a near-correct frame.
  • Measuring inseam in socks on a soft floor or without a firm book, which skews the result.
  • Skipping a test ride when you can get one.

FAQ

Should I size a Montague bike by height or inseam?

Use inseam as your main guide and height as a backup. Inseam better reflects how your legs reach the pedals and sit over the top tube. Worth reading next: Frog Bike Size Chart: How to Find Your Right Fit in 5 Steps.

How much standover clearance is safe?

Roughly 2 to 4 inches on most road and hybrid frames, with a little extra on mountain bikes. Less clearance makes it harder to stop and step off safely. Nishiki Bike Frame Size Chart: How to Find Your Right Fit goes further into this.

What if I fall between two sizes?

Check standover and reach on both. Choose the smaller frame if you prefer a more upright, agile ride, or the larger one if you want more stretch and stability, then adjust the saddle and stem. A related read: Touring Bike Frame Size Chart: How to Find Your Right Fit in 5 Steps.

Conclusion

Use your inseam to find the right Montague size range, then confirm standover, reach and saddle position before you commit. A short test ride will show you whether the fit feels natural. If you have a medical condition or a physical limitation, a bike fitter or your doctor can offer guidance tailored to you. We also found Aero Bike Size Chart: How to Find Your Right Frame Fit in 5 Steps useful on this point.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our cycling for beginners guides, checking product details against manufacturer specifications and owner feedback.