Updated November 2026
An orbea gravel bike size chart matches your height and inseam to a frame size, but the chart is only a starting point. In this guide you will measure yourself, read Orbea’s sizing table correctly, and check reach and stack so you can narrow down to the frame that fits you best. Most riders can finish the process in under an hour with a tape measure and a wall. For a deeper look, Scott Gravel Bike Size Chart: How to Find Your Frame Size in 6 Steps covers this in detail.
Step 1: Measure Your Inseam and Height
Start with your inseam, because it has the biggest influence on standover clearance. Stand barefoot against a wall with a book between your legs, pressed up firmly, and mark the top of the book on the wall. Measure from the floor to that mark in centimeters. Then measure your standing height, also barefoot, so you have both numbers in front of you.
Shopping for one? See our guide: 5 Best Road Bike Shoe Size Charts (2026): Expert Picks.
Step 2: Read the Orbea Chart Against Your Numbers
Orbea publishes gravel sizing by frame size, with ranges for rider height and, on most models, a recommended inseam. Find the row that covers your height, then check that your inseam falls within the suggested range for that size. If the two measurements point to different sizes, your inseam is usually the better guide for a gravel bike, since you will be standing over the top tube on rough ground.
Step 3: Check Reach and Stack for Your Riding Position
Frame size on paper does not tell you how you will sit. Look at the reach and stack figures listed for each size in the manufacturer’s geometry table. Reach is the horizontal distance from the bottom bracket to the head tube, and stack is the vertical distance. A longer reach stretches you out, while a taller stack sits you more upright. If you ride long distances on gravel, compare the stack-to-reach ratio of your two candidate sizes and favor the one that keeps your back angle comfortable. For another angle, check out Ridley Gravel Bike Size Chart: How to Find Your Frame Size in 6 Steps.
Step 4: Confirm the Fit With a Test Ride or Bike Fitter
If you can, test ride the size you think is right. With the bike level and you standing over the top tube, you should have roughly 2 to 3 centimeters of clearance on a gravel bike. On the saddle, your leg should have a slight bend at the bottom of the pedal stroke. Shops can make small changes to stem length and saddle position, but they cannot change frame size, so it is worth getting that part right before you buy. For another angle, check out Norco Gravel Bike Size Chart: How to Find Your Frame Size in 6 Steps.
Sizing Checklist
- Measure your height in centimeters, barefoot.
- Measure your inseam with the book method.
- Find the matching Orbea frame size for both numbers.
- Compare reach and stack for your top two sizes.
- Check standover clearance on a test ride.
Common Mistakes to Avoid
- Choosing a size based on height alone and ignoring inseam.
- Assuming a gravel bike should fit like a road bike. Gravel frames often run slightly taller for stability and clearance.
- Skipping the reach and stack comparison, which can leave you too stretched out on long rides.
- Buying a size up “to grow into,” which makes handling feel sluggish and the reach too long.
- Ignoring the stem and saddle. Small adjustments can refine the fit once the frame size is right.
Recommended Gear
A simple tape measure makes the inseam and height checks easier to repeat. View on Amazon
A bike-specific fit reference book can help you understand how stack and reach affect handling on gravel. View on Amazon
If you want a broader comparison before you commit, read Gravel Bike Size Chart: How to Find Your Frame Size in 6 Steps for general principles, and Gravel Bike Frame Size Chart: How to Find Your Fit in 6 Steps for how frame sizing works across brands. Riders comparing other makers may also find Trek Gravel Bike Size Chart: How to Find Your Frame Size in 6 Steps and Specialized Gravel Bike Size Chart: How to Find Your Frame Size useful.
FAQ
Should I size an Orbea gravel bike by height or inseam?
Use both, but give extra weight to inseam for gravel. Standover clearance matters more when you are riding over rough terrain and may need to dismount quickly.
Is an Orbea gravel bike sized like its road bikes?
Not exactly. Gravel frames often have slightly different geometry, so use the gravel-specific chart rather than the road chart. You may also like Orbea Mountain Bike Size Chart: How to Find Your Frame Size in 5 Steps.
What if I fall between two sizes?
Compare reach and stack for both sizes and test ride each if possible. If you ride mostly long, steady distances, the longer reach may suit you; for more upright, relaxed riding, the taller stack is often more comfortable. For a deeper look, Cube Gravel Bike Size Chart: How to Find Your Frame Size in 6 Steps covers this in detail.
Conclusion
Measure your height and inseam, match them to the Orbea gravel chart, and then compare reach and stack for your top two sizes. A quick test ride will confirm standover clearance and riding position. If anything still feels off after a few rides, a professional bike fitter can help you fine-tune the setup.

