Updated November 2026
A khs road bike size chart gives you a starting point for choosing a frame, but the chart only works well when you pair it with two or three body measurements. This guide walks you through those measurements, shows you how to read the chart, and explains how to confirm the fit before you buy. Most beginners can settle on a likely size within about 20 minutes.
Step 1: Measure Your Height and Inseam
Start with your standing height, measured barefoot against a wall. Next, measure your inseam: stand with your back against the wall, place a book between your legs at crotch height, press it upward firmly, and measure from the top of the book to the floor. Record both numbers in centimeters or inches, depending on which units the chart uses.
Shopping for one? See our guide: 5 Best Road Bike Shoe Size Charts (2026): Expert Picks.
Step 2: Read the Chart Against Your Measurements
Most khs road bike size charts list frame sizes in centimeters or inches along with a height range for each. Find the row that matches your height, then check whether your inseam falls within the range for that size. If the two measurements point to different sizes, favor the inseam for fit on a road bike, since it affects standover clearance and saddle height more directly.
| Rider Height (approx.) | Typical Frame Size Direction | Check |
|---|---|---|
| Shorter riders | Smaller frame, lower top tube | Standover clearance |
| Average riders | Middle of the chart | Reach to the handlebars |
| Taller riders | Larger frame, longer top tube | Stem and saddle height |
Use the table as a general guide only. The chart supplied by the brand is always the final reference for that specific model.
Step 3: Check Reach and Stack for Comfort
Frame size is only part of the fit. Look at the top tube length (horizontal reach) and the head tube height (vertical stack) listed in the khs geometry data. A rider who prefers a more upright position usually does better with a shorter reach and taller stack, while a rider after a more aggressive posture may want a longer reach. Compare these numbers with any bike you have already ridden to see which feels closest.
Step 4: Confirm Standover Clearance
Stand over the top tube of the frame with both feet flat on the floor. You should have roughly 2 to 4 centimeters of clearance between your body and the top tube. If you cannot straddle the bike without discomfort, move to a smaller size. Keep in mind that road bikes have sloping top tubes on many models, so the clearance check matters more on sloped frames than on traditional ones.
Step 5: Test Ride Before You Commit
If possible, ride the bike for at least 10 minutes. Pay attention to your lower back, neck and wrists. Numbness in the hands or pain in the lower back often signals a frame that is too long or a saddle set too low. A quick, shop-based fitting can adjust stem length and saddle position, which sometimes fixes a borderline size.
Common Mistakes
- Relying on height alone and skipping the inseam check.
- Mixing inches and centimeters when reading the chart.
- Buying a larger frame because you expect to grow into it.
- Ignoring standover clearance on sloped top tubes.
- Assuming a size from one brand matches another brand’s chart.
Recommended Gear
- A metal tape measure helps you take accurate inseam and height readings at home. View on Amazon
- A hardcover book works well as a simple inseam measuring tool when pressed between your legs. View on Amazon
- A bike fit sticker kit lets you mark saddle and handlebar positions as you adjust them. View on Amazon
FAQ
Does the khs road bike size chart work for every model?
Not always. Geometry varies between models, so use the chart for the specific khs frame you are considering. Compare its reach and stack numbers if you are between sizes.
Should I rely on height or inseam?
Use both, but give extra weight to inseam when deciding between two sizes. Inseam has a more direct link to standover clearance and saddle height.
Is it safe to ride a bike that is slightly too big?
A frame that is too large can make steering and braking harder to control. If you feel unstable or uncomfortable, consult a qualified bike fitter before riding regularly.
Conclusion
The khs road bike size chart is most useful when you combine it with your height, inseam and a test ride. Measure carefully, check standover clearance and compare reach and stack numbers. A few minutes of preparation will save you from a poor fit and make your first rides far more comfortable.
Related reading
- Women's Road Bike Frame Size Chart: How to Find Your Right Fit
- Vintage Road Bike Size Chart: How to Measure a Classic Frame in 5 Steps
- Trek Size Chart Road Bike: How to Find Your Frame Size in 6 Steps
- Trek Road Bike Frame Size Chart: How to Pick Your Right Size
- Trek Alpha Road Bike Size Chart: How to Find Your Frame Size
- Specialized Women's Road Bike Size Chart: How to Find Your Frame Size

