Caleb MorganBy Caleb Morgan

Updated November 2026

The gore bike wear gloves size chart is the fastest way to find a glove that fits your hand, but only if you measure correctly first. In this guide, you will measure your hand, match the result to the chart, and check the fit so your gloves stay comfortable on long rides and give you solid control on the bars. The whole process takes about five minutes.

Step 1: Measure Your Hand Around the Knuckles

Lay your dominant hand flat with your fingers together and your thumb tucked slightly in. Wrap a soft tape measure or a strip of string around the widest part of your hand, usually just behind the knuckles, not including the thumb. If you use string, mark the spot and measure it against a ruler. Record the measurement in centimeters or inches, whichever your chart uses.

Shopping for one? See our guide: 5 Best Road Bike Shoe Size Charts (2026): Expert Picks.

Step 2: Match Your Measurement to the Chart

Compare your number to the sizing table on the Gore product page or in the packaging for your model. Gore sizing is typically given as a range for each size, so if you land between two sizes, use the fit checks below to decide. Measure your other hand too, since many riders have one hand slightly larger, and size to the bigger one.

Size Hand Circumference (general guide) Typical Fit Feel
S Smaller end of the chart range Snug across knuckles, fingertips close to end
M Middle of the chart range Firm but comfortable, slight space at fingertips
L Upper end of the chart range Full coverage, no bunching at palm

Always confirm the exact ranges against the chart for your specific glove model, since these are general guides only.

Step 3: Check the Fit Before You Ride

Once you have a pair, try them on and make a fist, then spread your fingers wide. A good fit should let you do both without the glove pulling tight across the palm or the fingers flopping past your fingertips. Grip the handlebar in your normal riding position and check that the cuff sits comfortably over your wrist without cutting off circulation. Your fingertips should have a small amount of room, roughly the width of a fingertip, but no more.

Common Mistakes to Avoid

  • Measuring your hand with the thumb included, which inflates the number and leads to gloves that are too large.
  • Sizing down to look sleek, which restricts blood flow and causes numbness on long rides.
  • Ignoring the glove’s cut, since some models run narrower through the palm even within the same size.
  • Measuring cold hands after a long ride, when swelling can change your reading slightly.
  • Buying gloves without trying them with your bike’s grips or bar tape, since grip thickness affects how the glove sits.

A tape measure helps you get a precise hand circumference, and a simple soft one works best because it wraps closely around your knuckles. View on Amazon

If you ride in cool weather, a pair of thin liner gloves can change how your gloves fit, so it is worth trying them over a liner when you size. View on Amazon

For more on sizing, see Bike Gloves Size Chart: How to Measure Your Hand for the Right Fit and Fox Mountain Bike Gloves Size Chart: Find Your Fit in 6 Steps for a comparison with another popular glove brand.

FAQ

Should I size my gloves by my dominant hand or my non-dominant hand?

Measure both hands and choose the size that fits the larger one. A glove that fits your bigger hand will still be comfortable on the smaller one, while the reverse is rarely true.

What if my measurement falls between two sizes?

Try on both sizes and use the fit checks in Step 3. If your fingertips feel tight when you make a fist, go up; if the palm bunches, go down.

Do gloves stretch over time?

Synthetic and leather gloves may soften and stretch slightly with use, but they should not grow a full size. If a glove feels loose from the start, it is better to exchange it than to wait for it to break in.

Conclusion

Measuring your hand around the knuckles, matching the number to the gore bike wear gloves size chart, and checking the fit in your riding position gives you the most reliable result. Take your time with the measurement and try the gloves on before a long ride. A good fit keeps your hands comfortable and your grip secure from the first mile to the last.

Ready to choose one?

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our cycling for beginners guides, checking product details against manufacturer specifications and owner feedback.